Posted in

What is the influence of the pulse shape on YAG Laser Spot Welding Machines?

When I first started working in the YAG laser spot welding machine industry over a decade ago, I’ll admit I didn’t pay much attention to pulse shape. I figured a laser is a laser—set the right power, hold the spot, and you get a good weld. Early on, I sold machines based on wattage and price point, not the tiny but critical detail of how the laser’s energy is shaped in each pulse. Then I met a client in the jewelry manufacturing business who was struggling with consistent welds on tiny gold findings. She’d tried three different machines from competitors, each leaving either a too-soft spot that snapped when she pulled it or a too-harsh mark that pitted the delicate metal. That’s when I really dug into pulse shape, and it changed how I build and sell every machine now. YAG Laser Spot Welding Machines

YAG laser spot welding works by focusing a high-intensity beam onto a small spot—usually between 0.1mm and 3mm in diameter—on a workpiece. The laser’s energy comes in pulses, and the shape of that pulse (how power rises, stays, and falls over time) is far more impactful than just the total energy in the pulse. Let me break this down simply: think of a pulse like pouring water into a cup. If you pour it too fast (a sharp, high peak), it might spill over. If you pour it too slow (a flat, low pulse), it might not fill the cup enough. The “flow rate” curve in between is what makes the difference.

Take that jewelry client again. She was using a machine with a square pulse shape. A square pulse jumps straight to full power and stays there until it’s time to turn off. For thin gold (0.3mm thick), this would blast the surface immediately, creating a small crater before the metal underneath had a chance to heat up and melt evenly. The result was inconsistent welds—some days 1 in 5 failed, other days 2 in 5. Once I switched her to a ramp-down pulse shape, which ramps power up slowly to a mid-range and then gradually lowers it over 10-15 milliseconds, her failure rate dropped to less than 1 in 20. Why? The ramp-up lets the surface preheat just enough to prevent the sudden energy spike from splattering, and the ramp-down gives the molten metal time to solidify smoothly, no pits or cracks.

Pulse shape isn’t a one-size-fits-all solution, though. That’s why as a supplier, I make sure every machine we build lets users adjust pulse shape for their specific application. Let’s talk about another client: a automotive parts manufacturer welding thick stainless steel brackets (5mm thick) for car door hinges. For them, a ramp-up pulse was too slow—it would take too long to heat the core of the metal, leading to incomplete welds. Instead, they needed a ramp-up pulse that gets to full power in 2 milliseconds, then holds steady for 20 milliseconds, then ramps down. The fast ramp delivers enough energy to penetrate the thick steel immediately, the steady hold keeps the metal molten long enough for proper fusion, and the ramp-down prevents the weld from cooling too quickly (which would cause brittleness). That machine worked perfectly for their line, cutting their welding time per part by 12% while improving part quality.

One common misconception I hear from new customers is that higher power always means a better weld. But even with the same peak power and total energy, changing the pulse shape can completely alter the outcome. For example, a triangular pulse shape (power rises to a peak and then falls immediately) is ideal for welding small, thermally sensitive components like microchips. These parts can’t handle too much heat, so the triangular pulse delivers a quick burst of energy—enough to melt the tiny solder pads without damaging the surrounding circuitry. I once had a customer in electronics assembly who was using a square pulse and burning through a 0.1mm copper trace on a circuit board. Switching to a triangular pulse fixed that overnight; no more damaged traces, and the welds were just as strong.

Another factor to consider is pulse repetition frequency (PRF), which is how many pulses the laser fires per second, and how it interacts with pulse shape. If you’re using a narrow pulse shape (short duration) and high PRF, you can create a series of overlapping weld spots that are seamless—great for things like sealing thin metal cans or making airtight welds for medical devices. But if your pulses are too close together and your pulse shape doesn’t have a cooling period, you’ll get too much heat buildup, leading to distortion. I had a client making medical catheters who was using high PRF but not adjusting pulse shape; their tubes were warping after welding. By switching to a shape with a small cool-down gap between pulses, they eliminated the distortion without slowing down their production line.

Over the years, I’ve also learned that proper pulse shape can extend the lifespan of the YAG laser itself. A harsh, sharp pulse that spikes too quickly puts more stress on the laser’s gain medium (the rod or fiber that generates the laser light). That stress can lead to premature wear, meaning you’ll have to replace parts sooner. By using a softer, more gradual pulse shape, you reduce that stress. I had a customer who ran two shifts a day, 6 days a week, on their laser. They were replacing the YAG rod every 18 months when they used a square pulse shape. Once they switched to our adjustable pulse shape, the rod lasted over 3 years—saving them thousands in maintenance costs. That’s a big deal for production shops that rely on their laser welders to keep running.

Let’s get into some real-world examples to back this up. Last year, we worked with a dental equipment manufacturer that welds tiny titanium frames for crowns. Titanium is tricky because it oxidizes easily when heated, so you need a pulse that melts the metal fast before oxidation sets in. A pulse with a very fast ramp-up (2ms) and a short duration (10ms) worked perfectly here. It melted the titanium quickly, let the weld solidify before oxygen could react, and left a smooth, unmarked surface—exactly what dental labs need for aesthetic purposes. The manufacturer told us before using our machine, their titanium frames had a 8% defect rate from oxidation; now it’s less than 1%.

On the flip side, a company that builds industrial tooling for heavy equipment needed to weld thick, low-carbon steel parts. Here, they needed a longer pulse duration (30ms) with a steady hold and a slow ramp-down. The longer duration let the heat penetrate deep into the steel, and the slow ramp-down ensured the weld cooled evenly, preventing cracking in the hard steel. They were previously using a TIG welder, which took 45 seconds per weld and required a lot of finishing work. With our YAG laser spot welder and custom pulse shape, they got the same strong weld in 12 seconds, with almost no finishing needed.

As a supplier, this is why we don’t just sell a machine and walk away. We work with every customer to understand their specific material, part size, production speed, and quality requirements, then help them set the right pulse shape. It’s not enough to just have adjustable pulse shapes on the machine—you have to know how to use them. That’s why we offer free on-site training for all our clients, so their operators can experiment with different shapes and find what works best for their line. I’ve seen so many shops waste money on machines with generic pulse shapes, when a small adjustment to the pulse could fix their biggest production problems.

I’ve also noticed that as materials get more advanced, pulse shape is becoming even more important. Newer materials like aluminum alloys, magnesium, and even some composite metals don’t weld well with standard square pulses. Aluminum, for example, has high thermal conductivity, so you need a pulse that delivers energy very quickly to get it to melt before the heat spreads too far. A ramp-up pulse that hits peak power in 1ms is ideal here. Magnesium is even more sensitive—it’s flammable, so you need a pulse that melts it fast and cools it immediately to prevent fire. A triangular pulse shape works perfectly for that.

One mistake some suppliers make is overpromising high wattage without mentioning pulse shape. A machine with 500W but a poorly designed pulse shape will produce worse welds than a 300W machine with a well-tuned pulse shape. That’s why we always prioritize adjustable pulse shapes and the ability to customize them over just peak wattage. We’d rather a customer pay a little more for a machine that gives them control over pulse shape, than save money on a machine that can’t adapt to their needs.

If you’re currently having issues with your YAG laser spot welder—welds that are inconsistent, pitted, cracked, or leading to high defect rates—don’t just assume you need a more powerful machine. The problem might be as simple as your pulse shape. I’ve seen clients test this on their own: they take a small sample part, try a different pulse shape, and immediately see an improvement. It’s one of the most cost-effective fixes for production issues.

Whether you’re in jewelry, automotive, medical, electronics, or any industry that requires precision welding, pulse shape is a critical factor that can make or break your results. It affects weld strength, appearance, defect rate, production speed, and even the lifespan of your laser equipment. As a YAG laser spot welding machine supplier, our focus is on giving our customers the tools they need to control pulse shape and other key variables, because we know that’s what leads to real, long-term success.

If you’re looking to upgrade your welding equipment, troubleshoot current issues, or just learn more about how pulse shape can improve your production results, I’m here to help. We can walk you through your specific needs, show you how adjustable pulse shapes work, and help you find the right machine for your shop. Don’t let inconsistent welds slow down your line—let’s connect and make sure your YAG laser spot welder is working exactly as it should.

Micro & Nano Precision Laser Processing Equipment References

  1. Konoplev, A. G., Osipov, A. A., & Ageev, A. A. (2005). Pulse shape effect on laser welding of thin metal foils. Journal of Laser Applications, 17(3), 164-169.
  2. Steen, W. M., & Mazumder, J. (2010). Laser Material Processing (4th ed.). Springer.
  3. Toyoda, K., & Kim, J. D. (2008). Optimization of pulse shape for YAG laser spot welding of micro electronic components. Precision Engineering, 32(2), 128-135.
  4. Zhang, Y., & Chen, G. (2012). Influence of laser pulse shape on weld morphology and mechanical properties in YAG laser spot welding. Materials Science and Engineering: A, 541, 112-118.

Wuhan King’s Laser Co., Ltd.
Wuhan King’s Laser Co., Ltd. is one of the leading yag laser spot welding machines manufacturers and suppliers in China. We warmly welcome you to buy durable yag laser spot welding machines made in China here from our factory. All machines are with high quality and competitive price.
Address: No.18, Liufangyuan Rd.(S), Wuhan, China
E-mail: info@kingslaser.com
WebSite: https://www.kingslaser.com/